- Bu konu 6 yanıt içerir, 5 izleyen vardır ve en son 20 yıl 1 ay önce
tarafından güncellenmiştir.
-
1610/1630
*#170602112302# (software version)1610/1611
– IMEI number: * # 0 6 #
Software version: * # 1 7 0 6 0 2 1 1 2 3 9 2 #
Simlock status: * # 9 2 7 0 2 6 8 9 #2110*#9999# (software version)
2110i/2110e
*#170602112302# or (depends on model) *#682371158412125# (software version)NOKIA 3110*#06#IMEI*#3110#Software version##002#– allows to turn off voice mail.*#7780#– restore factory settings*#746025625# (or *#sim0clock#)– to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is a kind of standby mode which saces battery)*#92702689# (or *#war0anty#)-"warranty code:"- you have to enter one of the following codes:6232 (OK) – displays month and year of production date (ie "0198")7332 (OK) – displays date of last repair – if there is (ie. "DATE NOT SAVED")7832 (OK) – displays date of purchase – if there is (ie. "DATE NOT SAVED")9268 (OK) – displays serial number37832 (OK) – sets purchase date in format MMYY (MM – month, YY – year) – attention: you can set it only once, so beware !!!87267 (OK) – displays message "Confirm Transfer?" – meaning is unknown (?)* # 9 2 7 0 2 6 8 9 #Simlock info*#31# (call)– sets if your phone no. will be hidden or not (works only in some networks)*#76# (call)– sets if target phone number when you call should be displayed (works only in some networks)*#77# (call)– (works only in some networks)*#33/35# (call)– displays message "Service not active".**31# (call)– your no. will not be showed to others when you make a call
NOKIA 3210*#06#IMEI*#0000#software version*#92702689# (or *#war0anty#)enters service mode.*3370#Turns on sound encoding system – Enhanced Full Rate#3370#Turns off sound encoding system – Enhanced Full Rate*4720#Turns on battery save mode – saves about 30 % of energy.#4720#Turns off battery save mode.xx#Replace xx with desired phonebook entry – press # and you will see it on display
NOKIA 51XX*#06#IMEI*#0000#Software version*#92702689# (or *#war0anty#)Enter service mode.*3370#Turns on sound encoding system – Enhanced Full Rate#3370#Turns off sound encoding system – Enhanced Full Rate*4720#Turns on battery save mode – saves about 30 % of energy.#4720#Turns off battery save mode.#pw+1234567890+1provider lock status#pw+1234567890+2Network lock status#pw+1234567890+3Provider lock status#pw+1234567890+4SimCard lock status
NOKIA 61XX*#06#IMEI*#0000#
*#9999# (Nokia 6130)Software version*#92702689# (or *#war0anty#)Enter service mode.*3370#Turns on sound encoding system – Enhanced Full Rate#3370#Turns off sound encoding system – Enhanced Full Rate*4720#Turns on battery save mode – saves about 30 % of energy.#4720#Turns off battery save mode.NOKIA 81XX*#06#IMEI*#8110#Software versionxx#Replace xx with desired phonebook entry – press # and you will see it on display*#92702689# (or *#war0anty#)-"Warranty code:" – you have to enter one of the following codes:9268 (OK) – displays IMEI (International Mobile Equipment Identification)6232 (OK) – displays date of manufacture in format MMYY (MM – month, RR – year)7832 (OK) – displays date of purchase7332 (OK) – displays date of repair or upgrade37832 (OK) – sets date of purchase in format MMYY (MM – month, RR – year) – attention: you can set it only once, so beware !!!87267 (OK) – transmits user data/move data do service PC
NOKIA 8810*#06#IMEI*#0000#Software version*#92702689# (or *#war0anty#)Enter service mode.*3370#Turns on sound encoding system – Enhanced Full Rate#3370#Turns off sound encoding system – Enhanced Full Rate*4720#Turns on battery save mode – saves about 30 % of energy#4720#Turns off battery save mode – saves about 30 % of energy
NOKIA 9000*#06#IMEI*#682371158412125#Software version*#3283#Displays week and year of manufacture, ie. 1497 means 14th week of 1997.
NOKIA 9110*#06#IMEI*#0000#Software version*3370#Turns on sound encoding system – Enhanced Full Rate#3370#Turns off sound encoding system – Enhanced Full Rate*4720#Turns on battery save mode – saves about 30 % of energy#4720#Turns off battery save mode
*#06# IMEI number
*#0000# or < 0 0 0 0 > Restore English menu version
> * < < * < * Version of software
< * * < Simlock infoDiode flash info:
– green with frequency about 1 Hz (1 per second) – phone is network area.
– 2 fast flashes of diode during standby mode means that the phone changes channel.
– green flashing with high frequency. Means that you have unread SMS message or a phone call.
– flashing red – weak battery.
– red diode on – battery charge
– green diode on – phone's battery is full and battery charger is connected.
Activate net monitor: (pause means * holded until you see square)
[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
Deactivate:
[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This option might not work with some versions of phones' software.
When you press OK you will have access to 3 additional menu options
1) Active cell
Displays active channel and allows to choose between
RxLev, RxLevAM, NCC, BCC, MSTxPwr i C1.
During a call you can see:
RxLev, RxLevFull, RxLevSub, RxQualFul, RxQualSub, Timeslot, TimeAdv, PwrLev
During a phone call you can see type of negotiation SDCCH
(Standalone Dedicated Control CHannel) takes place.
It can be: SDCCH8 or SDCCH4 .
2) Nearest cell:
You can view nearest cells (1 – 6) and their position.
3) System parameters
Displays : Combined, AcsClas, MCC, MNC, LAC, CellID, T3212, BS-PA-MFRM i XZQTY.
During a call you can see: Combined, DTX, MCC, MNC, LAC, CellID
Explanation of names showed on display- RxLev: Power of incomming signal (dB)
- RxLevAm: Threshold value in dB, then it switches to other cell
- BCC: Broadcast Color Code Allows to see base stations transmitting on the same frequency.
- NCC: Network Color Code – National code of GSM operators GSM.
- C1: Space in dB from upper level at which it switches to other cell
- RxLevFull – Value of Cl parameter during continuous transmission.
- RxLevSub – Value of Cl parameter during non-continuous transmission.
- RxQualFull – Error bit rate measured for continuous transmission
- RxQualSub – Error bit rate measured for non-continuous transmission
- Timeslot – Time Slot Number. Number of frequency channel, description of time crack
- TimeAdv – Distance from transmitter in km. Multiply factor of results is 0,547
- PwrLev – Radiated power level
- MCC: Mobile Country Code – 260 = Poland
- MNC: Mobile Network Code – 01=PLUS GSM 02=ERA GSM, 03=IDEA appears after MCC.
- CellID: Cell ID
Power level0123456789101112131415dBm43413937353331292725232119171513Wats16,012,88,05,23,22,01,30,80,50,320,20,130,080,050,030,02
Codes work with following software versions
TX7705.3 / 2.362001.5 / 1.775005.3 / 2.1 , 6.0 / 2.1 , 6.3 / 2.382001.3 / 1.9 , 1.5 / 1.7 , 1.6 / 1.7 , 1.6 / 1.9 , 3.1 / 1.9
SGH600/2100DBIMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # or * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Memory reset (removes SIMLOCK!!!): *2767*3855# (works only on older versions)
Memory reset CUSTOM: *2767*2878# (works only on older versions)
Change dispplay contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # or * # 0 2 4 6 #
Battery status: * # 9 9 9 8 * 2 2 8 #
Change sound of alarm: *#9998*289#
Vibra test: *#9998*842#
IMEI *#06#
CD5
*#simlock# – shows simlock status
Date of software
Remove sim card, enter *#06# and pressMonitor Mode
To activate Monitor Mode you should press in following order:
Menu
9 (Phone Options)
7 (Phone Status)
left MENU key
7684666
Red HandSet keyAuthors
– To see surnames of this phone's authors you should:
– Enter phonebook
– Enter menu "own phone no."
– Enter as your own phone number: +12022243121
– OK
SONY CMD-Z1
*#8377466# – check software version
Sony CMD-C1IMEI number: * # 0 6 #
Software version: #8377466#
S4: Monitor Mode – how to activate:
Press left soft-key, then 9 (SET UP) 8 (Phone Status). You will see IMEI number, then press left soft-key and in order 7684666 and red phone at the end (monitor mode has been activated). To read information from Monitor Mode – press left soft-key, then 5 (GSM SERVICE) and 6 (Monitor). Monitor mode turns off when you switch off the phone. You must activate it again if you want.
How to see date of software:
Press left soft-key, then 9 (SET UP) 8 (Phone status). You will see IMEI number, then press twice left soft-key, 98, left soft-key, 7684666, red phone (activates Monitor Mode), left soft-key, 56 (turns on Monitor Mode), left soft-key, 98, left soft-key, 7684666, hang up (red phone) >abck to "normal" and then left soft-key, 56.
S6, S8:
If you add to phonebook under 'own phone number' +12022243121 with namez (for example MMI), then you will see something
S10, E10:
In phonebook enter +12022243121 as your own phone no. You will see a picture with sun, two palms and greetings.
S15e:
Monitor Mode:
Code: *#7436267*8378# (*#SIEMENS*TEST#)
Hold red phone button until it code disapears.
Menu 3.3.4 Choose frequency.
Menu 3.3.4.1 Automaticaly.
Menu 3.3.4.2 Choose GSM-900
Menu 3.3.4.3 Choose GSM-1800Menu 10.1 MS info
Menu 10.2 Soft date
Menu 10.2.1 Software version.
Menu 10.2.2 EEProm version.
Menu 10.3 Tst and product info.
Menu 10.3.1 Handware data.
Menu 10.3.2 Date of manufacture
Menu 10.3.3 Service date
Menu 10.3.4 Date of repair.
S25:
Enhanced Full Rate
*#3370# turns on
#3370# turns off
Haft Rate Mode
*#4720# turns on
#4720# turns off.
Languages:
*#0000#+green phone – choose automaticaly
*#0001#+green phone – English
*#0030#+green phone – Greek
*#0031#+green phone – Netherlands
*#0032#+green phone – French
*#0034#+green phone – Spanish
*#0039#+green phone – Italian
*#0049#+green phone – German
*#0090#+green phone – Turkish
How to change PIN2? **04*old PIN2*new PIN2*new PIN2# What is my software version? Menu 8-8-2 press left-softkey when you see IMEI number, or *#06# and then green phone button and then press left soft-key. How to extend battery life: IrDA – turn on only when you need. Turn off automatic network search (6-3)Turn off Vibration alarm. C25:
Languages:
*#0000#+green phone – choose automaticaly
*#0001#+green phone – English
*#0030#+green phone – Greek
*#0031#+green phone – Netherlands
*#0032#+green phone – French
*#0034#+green phone – Spanish
*#0039#+green phone – Italian
*#0049#+green phone – German
*#0090#+green phone – Turkish
How to change PIN:
**04*old PIN*new PIN*new PIN#How to check simlock status
*#0606# and then press left soft-key, you will see strange characters, then text ("brak blokad"). If you see for example 260-02, it means the phone is locked to Era GSM. In older models you can use *#06# and see the same information after clickin on left key (you will see IMEI and software version).
- Bu konuyu yanıtlamak için giriş yapmış olmalısınız.